First AEG: I know you said to get a Marui...

[Snorlax]

I was just surprised. All those little $20/$50 bits add up fast, haha.

[ReaperNet]

It's the shipping costs that hurt my soul.

[PepsiCo]

Worst thing about airsoft is after having spent all that $$$, you're never done and end up replacing half the shit you bought in the first instance...
Yay for softing of the air!

[Apollo]

Worst thing about airsoft is after having spent all that $$$, you're never done and end up replacing half the shit you bought in the first instance...
Yay for softing of the air!

Says the guy who spends all that money and uses his SOPMOD as a door stop lol

[sixthree]

I've been tempted now and then to photograph the amount of stuff I have and post it on ASNZ but I'm pretty sure I'll break the intehwebz.

Once you start buying crap it's impossible to stop.

[PepsiCo]

Says the guy who spends all that money and uses his SOPMOD as a door stop lol

HEY! NONE OF THAT!..........



...........besides, it works >__>

[Snorlax]

In case anyone's interested, I went through and rated the rice I've got. Some of the bits are awful, some of them are great. Might help anyone with a Hi Capa who wants to know what's good and what's WE-level junk.

Spreadsheet.

[Snorlax]

Actual AEG chat. Flazz, here's the list for pre-approval:

Prometheus EG Barrel 363mm
Prometheus Stainless Hard Cylinder Type B
Prometheus Shims Set
Prometheus Hard Selector Plate Metal
SHS Enhanced Steel Gear Set
Prometheus Air Seal Chamber Packing
Prometheus Aero Cylinder Head
Prometheus Air Seal Nozzle
Prometheus Hard Piston
Prometheus Piston Head
MagicBox 5.9mm Bushing Set

I think that's everything. Then furniture is:

Madbull Daniel Defence Licensed M4A1 12.5 Inch RIS II (Black)
Magpul MIAD Pistol Grip
Magpul CTR Stock

[Flazzbog]

Just make sure your piston, piston head, cylinder head, nozzle and gears are for next gen v2. The piston needs to be for the m4 series not the scar.

[Snorlax]

Yeah it was all listed for Next Gen series and specifically M4's where possible. Nate said to get the SHS High Torque motor, do I need the long or the short one?

Ordered so far:

Prometheus EG Barrel 363mm for M4A1, SR16, SG551
Prometheus Stainless Hard Cylinder Type B for Marui AEG
Prometheus Shims Set
Prometheus Hard Selector Plate Metal New Ver.2 for TM SOPMOD M4
Madbull Daniel Defence Licensed M4A1 12.5 Inch RIS II (Black)

When my paycheck hits tonight/tomorrow I'll source the rest.

edit: The piston head is PR-4560329175101 on redwolfairsoft. Is that the right one?
edit2: Which SHS Gear Set is it? This place has the best selection I can find: Airsoft Helper

[Flazzbog]

Long motor. You can get them from reapertech if they're out of stock in china.

[ReaperNet]

•You want a long motor.
•GEARS
•Not sure about that piston, as Flazz said it has to be an SOPMOD one - that one has SCAR in the name...

[Snorlax]

It's either Piston for SOPMOD M4/SCAR-L or Piston for SCAR-L (only)

The descriptions are different for both so I'm inclined to believe the first one will be fine (since it also states it's good for SOPMOD).

And I can't find anywhere with those SHS gears in stock. The descriptions and names are different everywhere else.

edit: Derp, nevermind. Found them

[Eda]

Piston for SOPMOD M4/SCAR-L

This is the one for the M4. The SCAR one has the cut out section at the top of the piston cos the recoil unit sits above the gearbox on the SCAR.

[Snorlax]

RedWolf Airsoft Order 1
Prometheus Metal Selector Plate
Prometheus Shim Set
Prometheus Cylinder Type B
Prometheus EG Barrel 363mm
Madbull Daniel Defense RIS II 12.5" (Black)

RedWolf Airsoft Order 2
Prometheus Soft Hop Bucking
Prometheus Cylinder Head
Prometheus Sealing Nozzle
Prometheus Piston Head
Prometheus Hop Tensioner
Magpul CTR Stock (Black)
Magpul 0.55" Rubber Buttpad
Magpul MIAD Grip (Black)
G&P T1 with QD Medium Mount

WGC Shop
Lonex A1 Supreme Long Motor

Airsoft Helper
SHS Gear Set
Prometheus Piston
Prometheus Spring Guide
Prometheus Cylinder Type A

eHobby Asia
Magpul PMAG x5
MagicBox 5.9mm Bushing Set

It's a pain in the ass trying to find all the bits in stock. Finally sourced everything. Picked up a few toys here and there along the way.